How To Ungroup An Uploaded Image In Design Space

Ever have a SVG file that is a single color and cannot be ungrouped?

There are a couple of reasons for this:

#1 – Uploading the PNG file instead of the SVG file. Most times a file will include SVG and PNG files. It's easy to error the PNG file for the SVG file because it displays a preview moving picture and the SVG file displays an icon of what browser you employ instead of a display of the SVG paradigm. When uploading a PNG it will usually have a transparent background and requires no clean upwards, just will yet have you through all of the upload screens and at the stop you'll accept to choose to relieve it as a Cut File or Print And so Cut file. Whereas, when uploading a SVG file it skips the make clean up screens and goes direct to the Prepare to Upload screen.

#2 – The designer of the SVG file combined all of the pieces into one layer. In Pattern Space one layer = ane image. Yous will know if information technology's a single prototype by looking in the Layers panel and seeing one layer or multiple layers. If multiple layers accept been grouped it have the give-and-take Grouped in a higher place them. That means that you tin can Ungroup that group of layers. If you only come across 1 layer and not the discussion Grouped, then unfortunately that image cannot be ungrouped past using Ungroup. Fret non, at that place is a way to "Ungroup" a unmarried layer epitome by using duplicate and the Contour function.

A piffling well-nigh the Contour function

Contour allows yous to hide unwanted cut lines in an prototype layer. You hide cut lines past clicking on the lines – the lines will be a light greyness. When the lines are not hid – the lines volition be a dark gray. Contour is not permanent, significant you lot tin hide and unhide lines past clicking on the prototype and so the Contour button. Contour is bachelor on all Design Space apps, simply is easiest to employ on the desktop version of Design Infinite.

Graphics Gear up Used

84 Funny Loading… Please Wait Packet

Let the tutorial begin!

While browsing Artistic Fabrica I came across the 84 Funny Loading… Please Wait SVG Bundle, and liked a lot of the files that were in the bundle. Later on I unzipped the file and uploaded one of the SVG files I realized the SVG was a unmarried image layer and that I couldn't use Ungroup to break it autonomously. Run across I wanted to have different colors for parts on the file, like greenish for the loading bar bars and brown for the discussion java and everything else blackness. That manner I tin can cutting each piece on their own mat. To practice this I decided to use Contour. You might exist saying "why not use a rectangle and Piece?" Images that Contour is used on are editable fifty-fifty if you save the file and shut Blueprint Space, Slice is permanent. For some images that are not a circumvolve or rectangle using Piece is not very effective, because you'll have to slice and die the epitome to get the pieces "ungrouped".

Pace #1 – Navigate to the SVG file.

Step #2 – After uploading the epitome Insert information technology to the canvas.

Pace #3 – Indistinguishable your epitome for as many colors yous want the image to have.

Step #4 – In the top carte du jour bar click on the Select All button. This will select all of the images that are on the canvas.

Step #v – In the elevation carte du jour bar click on Align, and so select Centre. This will stack all of the duplicates on summit of each other.

*Annotation: If you don't move any of the duplicates and leave them centered, and shut and open the center on the paradigm layer you want to work on. And then at the stop when all of the image layer'south eyes are opened, the different colored layers will be in their original position.

Step #half-dozen – In the Layers panel close the eye on 2 of the epitome layers, by click on the eye to the right of each.

Pace #7 – Click on the epitome that is left on the canvass, and then click on the Contour push button in the lower right corner of the Layers console.

Step #viii – You should now encounter the Hide Profile pop upward window. You tin click on whatsoever cut line to hide it.

There are 2 ways to know if a cut line is hid or visible:

#1 – in the preview the cutting lines that were clicked on to hide will be a light grayness. The dark grey cut lines will be visible.

#ii – in the cut lines console, to the correct, shows each individual cutting line that tin be hid. Cut lines with a light gray bar volition exist visible. Cutting lines with a dark grayness bar are hidden.

Pace #ix – This image layer volition be the first color. Determine which parts of the epitome will be the same color. Let's hide the word java and the power bar bars. Hibernate all of the cut lines that will not be that color. When done close the Hide Contours window by clicking on the X in the upper right of the pop upwards window.

NOTE: Make sure you hid all of the cut lines you wanted to hide. You lot can usually run into cut lines you missed or didn't hateful to hide when looking at the image on the sheet screen. If you see cut lines that need to be edited, just click on the paradigm and click the Contour button.

Step #10 – Close the eye on this image layer in the Layers console and open the eye on 1 of the duplicates.

Step #11 – This image layer volition exist the second color. You lot'll need to determine which pieces of the image is going to be your next color. Let'due south hide all cut lines, except the power bar bars. Click on the image, then click on the Contour button. The quickest way to get the power bar by itself and not have to click on every cut line, is by clicking on the Hide All Contours button in the lower correct of the Hide Contours pop upward window. Click on the cut lines for each role of the power bar to unhide and make visible again.

NOTE: When using Hide All Contours it will hide all cut lines except i cut line, which is usually the very first cut line in the cutting lines panel to the right. Y'all cannot hide all of the cut lines, one must be still visible. When you unhide the cutting lines yous desire, you can then go and hibernate the cut line that was visible.

Pace #12 – Repeat Steps #10 & #11 for each colour left to practice.

Footstep #13 – Open up the eyes on each prototype layer.

Select one of the image layers so y'all can change the color for information technology. In top menu bar to the right of the Performance drop down click on the tiny black foursquare. The small pop up is where you select the color. You'll need to practise this for each paradigm layer you want to exist a unlike colour. Turning the epitome layers to dissimilar colors will result in the image layers going to their ain color cutting mats.

I hope this tutorial showed how piece of cake it is to use the Contour office to aid "Ungroup" aka suspension autonomously a single layer SVG file. Using Contour is easier to employ than Slice to intermission apart a single layer SVG file. If you oasis't used Slice much, then Contour would be less frustrating. Give the Contour function a endeavor, you cannot mess up annihilation.

Thank you for reading!

Source: https://www.creativefabrica.com/the-artistry/cricut-design-space/how-to-ungroup-a-single-layer-svg-file-in-design-space/

Posted by: demarialegis2001.blogspot.com